Air purifier AP 90 from ETS
and AirAingel air purifier AP-90
For rooms up to 80m² & air volume of 720m³/h
Coherent overall system for air disinfection and air purification
Six key factors for safe and clean indoor air
Pre-Filter
It is used for general filtration of coarse dirt to reduce the contamination of the HEPA filter.
HEPA H13 FILTER
They filter out particles with an aerodynamic diameter smaller than 0.1 µm, e.g. bacteria and viruses, pollen, dust, aerosols and smoke particles. The filters are approved according to EN 1822 or ISO 29463.
AKTIV CARBON FILTER
Odours and a wide range of harmful gases are absorbed, including formaldehyde and ozone.
UV-C TECHNOLOGY
UV light in combination with a TiO2 filter destroys the genetic material of viruses, bacteria and fungi and thus eliminates the infectious potential or the possibility to multiply.
PLASMA TECHNOLOGY
Plasma generates a static charge on particles that causes them to clump together so that they can be filtered.
SENSOR TECHNOLOGY
Two independent sensors continuously measure the air quality and intelligently adjust the cleaning performance.
TRIPLESHIELD
HEPA-FILTER I PLASMA I UV-C
Optical air quality display
Indoor air measurement
1. PARTIKEL-SENSOR PM2.5 (Particulate matter)
Measures the fine dust and particle pollution in the air and gives the control system an impulse to intelligently adapt the ventilation program to its environment.
2. Hazardous material sensor (TVOC / Gases)
Measures the CO₂ content and detects ozone, formaldehydes and alcohols in the atmosphere and gives the controller an impulse to intelligently adjust the ventilation program to the current air quality.